性别与城市交通

男人在所有的社会中都拥有更多的机会获取到更优越的交通工具，他们更经常使用家庭小汽车或是利用可支配收入使用公共交通替代步行。不必提较差的工作与教育机会，机动化的缺乏就往往在给妇女长期带来不利经济地位的问题上扮演着一个被忽视的、但却十分重要的作用。     

Numerical study of steady turbulent flow through bifurcated nozzles in continuous casting

Bifurcated nozzles are used in continuous casting of molten steel, where they influence the quality of the cast steel slabs. The present study performs two-dimensional (2-D) and three-dimensional (3-D) simulations of steady turbulent(K- ε) flow in bifurcated nozzles, using a finite-element (FIDAP) model, which has been verified previously with water model experiments. The effects of nozzle design and casting process operating variables on the jet characteristics exiting the nozzle are investigated. The nozzle design parameters studied include the shape, angle, height, width, and thickness of the ports and the bottom geometry. The process operating practices include inlet velocity profile and angle as well as port curvature caused by erosion or inclusion buildup. Results show that the jet angle is controlled mainly by the port angle but is steeper with larger port area and thinner walls. The degree of swirl is increased by larger or rounder ports. The effective port area, where there is no recirculation, is increased by smaller or curved ports. Flow asymmetry is more severe with skewed or angled inlet conditions or unequal port sizes. Turbulence levels in the jet are higher with higher casting speed and smaller ports. Formerly Research Assistant, Department of Mechanical and Industrial Engineering. Formerly Research Assistant in the same department.     

Nanoparticles in Catalysis

In this article, we report studies of two new forms of highly active supported catalysts. First, those derived from supported carbonylate clusters—nanocatalysts and second, those produced from the heterogenization of known chiral homogeneous systems. The utilization of established cluster compounds of precisely known composition and structure have proved invaluable in the preparation of mixed metal nanoparticles of well-defined composition. The attachment of these nanoparticles to the inner walls of mesoporous silica has led to the development of highly active and effective catalysts for a series of hydrogenation reactions, emphasizing the enhanced reactivity of these metal systems as a consequence of their size and of the low coordination numbers of the metal atoms involved. These attributes combined with the relative ease of characterization of both the active sites and their location has led to a detailed examination of the role of these nanosystems in a new approach to clean technology. In an alternative strategy, the use of heterogenized homogeneous chiral catalysts based on the ferrocenyl moiety and diamino ligands and linked to the inner surface of mesoporous materials either by a direct chemical bond or by an ionic interaction has also been explored. These catalysts have been shown to be highly effective in the enantioselective synthesis of organic compounds. Significantly, we have found that the mesopore (usually MCM-41) imposes spatial restrictions arising from the concavity of the inner surface and leads to greatly enhanced enantioselective (ee) performance.     

Delaminations at the free edge of a composite laminate

The concept of a fracture process zone where damage takes place is used to analyse the delaminations at the free edges of angle ply laminates under uniaxial tension. The use of a fracture process zone removes the singularity in the interlaminar stresses and enables the initiation and growth of delaminations to be modelled for a perfect laminate without any assumed prior defects. Two different models for the stress displacement relationship in the fracture process zone are examined: a constant stress up to critical displacement and a linear relationship. Finite element analysis shows that there is little difference in the predictions obtained from the two models. An approximate analysis is presented for the constant stress stress-displacement model which is shown to agree with a finite element solution and experimental data. Hence it is argued that the approximate method using a constant stress model for the fracture process zone is sufficient for accurate prediction of delaminations.     

Evaluating a graphical notation for modelling software development methodologies

This work aims at evaluating a graphical notation for modelling software (and other kinds of) development methodologies, thus demonstrating how useful the graphical aspects can be for sharing knowledge between the people responsible for documenting information and those responsible for understanding and putting it into practice. We acknowledge the importance of having a common set of symbols that can be used to create, use and disseminate information for a larger audience than is possible today with a variety of alternatives and lack of a common ground. Using a cognitive dimensions framework, we make a standard evaluation of the elements and diagrams of the notation proposed to support the ISO/IEC 24744 methodology metamodel standard, considering the trade-offs between different dimensions. We suggest improvements to this existing notation based on this analysis, in the context of improving communication between creators and users of methodologies.     

The dielectric response of doped semiconducting glasses

Measurements are reported of the dielectric properties of two semiconducting glasses of composition SiO₂ · Na₂O with admixtures of Sb_{2O 5} and SnO₂, covering a wide range of temperatures and a range of six decades of frequency 10^–2 to 10⁴ Hz. Both glasses show a gradual evolution of growing low frequency dispersion (LFD) with increasing temperature, with both the real and imaginary components of the complex susceptibility following a power law of the type ^n–1, with n 1 at the lowest frequencies. There are also clear indications of reversible phase transitions taking place which manifest themselves by changes in the spectral shape of the dielectric response.     

Characterization and Reconstitution of Human Lipoyl Synthase (LIAS) Supports ISCA2 and ISCU as Primary Cluster Donors and an Ordered Mechanism of Cluster Assembly

Lipoyl synthase (LIAS) is an iron–sulfur cluster protein and a member of the radical S-adenosylmethionine (SAM) superfamily that catalyzes the final step of lipoic acid biosynthesis. The enzyme contains two [4Fe–4S] centers (reducing and auxiliary clusters) that promote radical formation and sulfur transfer, respectively. Most information concerning LIAS and its mechanism has been determined from prokaryotic enzymes. Herein, we detail the expression, isolation, and characterization of human LIAS, its reactivity, and evaluation of natural iron–sulfur (Fe–S) cluster reconstitution mechanisms. Cluster donation by a number of possible cluster donor proteins and heterodimeric complexes has been evaluated. [2Fe–2S]-cluster-bound forms of human ISCU and ISCA2 were found capable of reconstituting human LIAS, such that complete product turnover was enabled for LIAS, as monitored via a liquid chromatography–mass spectrometry (LC–MS) assay. Electron paramagnetic resonance (EPR) studies of native LIAS and substituted derivatives that lacked the ability to bind one or the other of LIAS’s two [4Fe–4S] clusters revealed a likely order of cluster addition, with the auxiliary cluster preceding the reducing [4Fe–4S] center. These results detail the trafficking of Fe–S clusters in human cells and highlight differences with respect to bacterial LIAS analogs. Likely in vivo Fe–S cluster donors to LIAS are identified, with possible connections to human disease states, and a mechanistic ordering of [4Fe–4S] cluster reconstitution is evident.     

Some aspects of the analysis of coal by X-ray fluorescence spectroscopy

Bituminous coal samples from 84 distinct sources were analysed by conventional British Standards (BS) methods for phosphorus, sulphur, chlorine, ash and the ash-forming elements (calcium, silicon, aluminium, iron, sodium, magnesium, potassium, titanium and manganese). In most cases four determinations were made per element per source. Samples were crushed to ?212 μm (72 BS mesh) and pressed into aluminium cups at 20 t in^?2 (309 MPa) without binder or backing. Two pellets from each sample were analysed by wave-length dispersive X-ray fluorescence techniques, using a spectrometer equipped with a rhodium rube; the X-ray count took 60 s. The X-ray results were calibrated against the conventional results using multiple regression. The accuracy obtained was comparable with routine ‘wet chemical’ techniques. The X-ray technique is suitable for the routine determination of large numbers of samples.     

High resolution STEM/EDX spectral imaging to resolve metal distributions within ∼100 nm combustion generated ash particles

Ultrafine ash particles play an important role in establishing a sticky inner deposit layer on heat transfer surface for power plants, but it is still unclear whether a thin surface alkali coating on these ultrafine particles might control this deposition behavior. In this research, we used a high resolution FE-TEM/STEM equipped with twin SDD EDX detectors for high X-ray detection efficiency, to determine the presence and absence of surface enrichment of alkali metals on ultrafine solid fuel ash samples that had low bulk alkali compositions but high deposition rates. Results from two types of combustion generated nano-sized ash particles are presented. One was from the oxy-combustion of pulverized bituminous coal, the other from oxy-combustion of pulverized rice husks, both being burned in a 100?kW rated down-flow laboratory combustor. Elemental mapping results from STEM/EDX uncovered some surface enrichment of alkali metals in ultrafine ash particles, where it existed, as it did for combustion of rice husks. However, it was not able to discern similar alkali metal surface enrichment for the bituminous coal ultrafines that had resulted in even higher deposition rates. Since deposition rates from both of these cases lie on the same correlation with PM₁, one can conclude that although surface enrichment of alkali metals is present for some ～100?nm particles, it is not a prerequisite to achieve high inner surface deposition rates. This is in contrast to prevailing theories that point to alkali metals as “bad actors” as far as the sticky inner deposition rate is concerned.

Copyright © 2019 American Association for Aerosol Research